AH-280 Automated Programming Equipment
AH-280 Automated IC Programming Equipment follows the success ofthe mechatronic design ofLeaptronix AH-480 Series and is greatly improved with an upgraded rotary robotic arm and two horizontal arms with four vertical axes equipped with specially designed nozzles at both ends for device pick &place. In addition, the programming system is loaded on the linear axis, which offers an even faster programming process of perfect precision. The aim of this model is simply to provide the most cost-effective solution to device programming and lower the production costs while offering the highest efficiency.
We’d love to help you boost your production efficiency. Contact us.
AH-280 Series IC Automated Programming Equipmentt
_Specifications_
|
|
U.P.H. |
3K(programming time < 8s) |
|
Operation |
Repeatability |
X Axis ±0.02mm R Axis ±0.067 º Z Axis ±0.02mm |
|
Max. Stroke |
X axis 590mm R axis 340º Z axes 28mm |
|
|
IC Pick & Place |
Vacuum Nozzles |
|
|
Device Detection |
Vacuum Sensor |
|
|
Dimension(Main Unit) |
1280x600x1210(W/D/H)mm |
|
|
Dimension with LED Alarm & Packing Modules |
2100x600x1720(W/D/H)mm |
|
|
Weight |
200kg |
|
|
Position System |
Positioning |
Mechanical Offset Correction |
|
Device Size |
30 x 30mm (Max) |
|
|
Programming System |
Built-in Programmer |
Leaper-56 Universal Programmer |
|
Adapter No. |
1~36 |
|
|
PIN Driver |
48 Universal |
|
|
IC Type Packages |
MCU, NAND Flash, NOR Flash, SPI, EEPROM, EPROM, FPGA… |
|
|
IC Packages |
WLCSP, BGA, u-BGA, QFN, LQFP, MLP, SNT, WSON, TSSOP, SSOP, SOP… |
|
|
File Format |
INTEL HEX, MOTOROLA HEX, TEK HEX, ASCII HEX, BINARY…. |
|
|
Communication |
USB 2.0 |
|
|
Input Media |
Tube Input |
150mil, 207mil, 300mil, 330mil |
|
Tube Output |
150mil, 207mil, 300mil, 330mil |
|
|
Tape Input |
Tape Width 12~24mm |
|
|
Tape Output |
Tape Width 8~32mm (Pressure self-sealing) |
|
|
Control System |
OS |
Windows XP embed |
|
Display |
17” LCD |
|
|
Data Input |
Keyboard/Mouse |
|
|
Power |
AC Input |
AC 200V~245V, Single Phase 3-Wire |
|
Frequency |
50/60Hz |
|
|
Power Consumption |
450W |
|
|
Air Pressure |
0.6MPa (~6.0kg/cm2) |
|
|
Air Input |
32 L/Min. |
Features
- Highest Cost-Effectiveness AH-280 universal programmer utilizes advanced and patent rotary arm design offering a fully automated system of high efficiency and precision with a rather low cost, beating any other programming equipment on the global market.
- l Upgraded Robotic Arms AH-280 universal programming system offers an upgraded rotary robotic arm and two horizontal arms with four vertical axes equipped with specially designed nozzles at both ends for device pick & place. The repeatability is ensured by the precise motors of each axis.
- l Universal IC Programmers The built-in 6-12 units of Leaptronix ultra speed universal programmers provide a wide range of supported devices including SPI, Nand, Nor flash, MCU, MCP, Microcontroller, eMMC, SRAM, eeprom, PLD…etc.
- l HDCP Programming Function(Optional) AH-280 universal programmer meets the requirements of various file formats and also offers an optional HDCP serial programming function.
- l CCD Position Module(Optional) CCD position modules of high pixels for faster coordinates adjusting come as an option.
- l Supporting Various IC Packages Various optional adapters are provided for IC packages such as WLCSP, LQFP, BGA, QFN, TSOP, SOP … etc.
- l Absolute Coordinates Every operation site from the tiniest to the largest is based on absolute coordinates throughout the whole designing, production, and assembly process. This provides the easiest operation with little configuration requirement.
- l Automated Marking
- Marking modules capable of marking in dot, digits, and letters can be equipped for reel/tape out-put media.
- l Flexible Modules to be chosen AH-280 Universal Programmer series offers easily changeable modules for marker & AOI modules for maximizing productivity in factories.